Civil contractors, precast yards and small building teams across Gauteng, KwaZulu-Natal and the Western Cape work from the same panel module, the same clamp jaws and the same tie rod thread. This page is where that shared practice gets written down: how teams plan pours, how they strip and stack panels between cycles, and what they pass on to the next foreman on site.
Most formwork problems on site trace back to mismatched hardware, not bad concrete. These are the things Oss-Form solves for the contractors, precast yards and small building teams who order from us week after week.
The 600x1200 face sets the grid. Clamps, tie rods and column jaws are cut to the same folded edge, so a panel from the wall set drops straight into a column box without shimming or site fabrication.
Panel weight, safe working load and compatible hardware are stamped on the item, not buried in a PDF. That means transport loads and crane lifts can be planned before the truck leaves the yard.
Galvanised is the default for coastal work along the KZN and Western Cape lines. Powder-coated panels are available where a yard wants colour-coded stock by bay or by contract.
Bundles are quoted per project, so a crew can order the same panel count for the next pour rather than re-measuring from scratch. Replacement clamps and cones are held as separate line items.
Panels, props and striking tools ship from Gauteng to Gauteng, KwaZulu-Natal and the Western Cape. Precast yards running repetitive cycles can plan around a known dispatch window.
Building a full wall set for the first time? See how we structure offerings and the approach we take with new crews.
Precast yards, civil crews and small building teams working across Gauteng, KwaZulu-Natal and the Western Cape tend to settle on the same few items. These are the ones that come up most often when foremen compare notes on stripping times, clamp wear and transport loads.
Wall and slab pours
The module most wall sets are built around. Folded edge takes standard clamp jaws without shimming, and each panel is weighed and stamped so you can plan crane lifts before the truck leaves Johannesburg.
Panel specs and finishesColumn forming
Slotted side rails and a threaded tie square column forms from 200 mm up to 800 mm. No welding, no site fabrication. The same jaws fit wall returns, and the carry frame doubles as a stacking pallet.
Clamp range and hardwareSuspended slabs
Props in three extended heights with the safe working load stamped on the outer tube. Drop heads and cone plugs share the tie rod thread, which keeps the hardware pool small on a repetitive slab cycle.
Prop heights and ratingsCoastal sites usually ask for galvanised stock, inland yards often prefer powder-coated panels for colour-coded inventory. Both are held in Johannesburg and quoted per project bundle.