Oss-Form

Slab support package

Slab Prop and Cone System

Props, drop heads and cone plugs for suspended slabs

A prop and cone package sized for repetitive slab cycles, with load ratings printed on each tube and matching cone plugs for the strike sequence.

Suspended slab work needs props that can be set, loaded and struck in a predictable order, and this package is built around that cycle. Props are supplied in three extended heights with the safe working load stamped on the outer tube, so the foreman can match them to the pour drawing without a separate table. Drop heads and cone plugs are sized to the same thread as the tie rods, which keeps the hardware pool small on site. Reusability notes on each item cover thread cleaning and the point at which a prop should be taken out of service.

Specification notes

Prop heights
Three extended lengths
Load rating
Stamped on outer tube
Thread fit
Matches tie rod thread
Components
Props, drop heads, cone plugs
Service notes
Thread cleaning and withdrawal
Finish
Galvanised or powder-coated
Request a quote See the 600x1200 panel

Bundles are quoted per project, so crews can order repeatable counts of props and cone plugs rather than guessing. Stock is held in Johannesburg for delivery to Gauteng, KwaZulu-Natal and the Western Cape.

Slab props and drop head hardware supporting a suspended concrete slab

Catalogue

Slab Prop and Cone System

Props, drop heads and cone plugs sized for repetitive suspended slab cycles. Load ratings are stamped on each outer tube, and the cone thread matches the tie rods already in the hardware pool.

Sort: Slab cycle Filter: Suspended slabs Finish: Galvanised
Stacked steel formwork panels with folded edges in a yard

600x1200 Modular Steel Panel

Standard panel for wall and slab pours

This is the panel that most site teams order first, because it sets the module for everything else in the wall set. The 600x1200 face is pressed from 3 mm steel with a folded edge that takes standard clamp jaws without shimming. Galvanised finish is the default for coastal work, and powder-coated panels are available where the yard wants colour-coded stock. Each panel is weighed and stamped so foremen can plan transport loads and crane lifts before the truck leaves Johannesburg.

View panel details
Steel column clamp hardware assembled around a concrete column form

Adjustable Column Clamp Set

Four-piece clamp for square and rectangular columns

Column work is where most small teams lose time, because every column size needs a different box. This clamp set uses slotted side rails and a threaded tie to pull the form square across a 200 mm to 800 mm range. The jaws are cut to match the folded edge of the standard panel, so the same clamp works on wall returns and isolated columns. Striking is done with a spanner and a wedge, and the set is supplied in a steel carry frame that doubles as a stacking pallet.

View clamp set details
Slab props and drop head hardware supporting a suspended concrete slab

Slab Prop and Cone System

Props, drop heads and cone plugs for suspended slabs

Suspended slab work needs props that can be set, loaded and struck in a predictable order, and this package is built around that cycle. Props are supplied in three extended heights with the safe working load stamped on the outer tube, so the foreman can match them to the pour drawing without a separate table. Drop heads and cone plugs are sized to the same thread as the tie rods, which keeps the hardware pool small on site. Reusability notes on each item cover thread cleaning and the point at which a prop should be taken out of service.

View prop system details
Cookie settings

We use cookies to keep the site reliable, remember basic choices, and understand which pages are useful. You can accept, reject, or review the settings before continuing.

Settings Reject Accept